Description
Overview
The Portable 5 Gallon HPSS Foamer is a 2 GPM @ 700 PSI foam applicator for projecting foaming chemicals on to any surface up close or at a distance. Featuring an all stainless steel cart assembly, this stainless steel venturi injection system uses high water pressure (400 – 1000 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. Rich, clinging foam is created by injecting compressed air into the solution to greatly increase volume and coverage ability. The foam is then projected through the discharge hose and fan nozzle at distances up to 13 feet.
Key Features
- Stainless steel foamer body for durability and maximum chemical resistance
- Projects rich, clinging foam which increases chemical contact time and effectiveness
- Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
- Fan pattern nozzle for quick coverage (up to 13′ range)
- Covers up to 500 sq ft (46.5 sq m) in 2 minutes
- Optional zero degree nozzle for increased foam throw
- Adjustable foam consistency (wet/dry)
- Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
- Available with a higher flow rate (#917805)
- See other Lafferty high pressure chemical applicators in Catalog 3
Includes
- All stainless steel 2-wheel cart with non-marking tires & integrated hose rack
- Stainless steel, round, 5 gallon jug rack (square available)
- Machined stainless steel foamer body
- 20 color-coded precision metering tips to set dilution ratios
- 50′ discharge hose with polypropylene open flow foam wand and fan nozzle
Requirements
Chemical Concentrate |
---|
Water | |
---|---|
Temperature | up to 180°F |
Pressure | 400 to 1000 PSI |
Flow | 2.0 GPM @ 700 PSI |
Supply Line | 3/8″ |
Compressed Air | up to 5 CFM |
Hose | 1/2″ ID x 50′ |
Nozzle | 50250 |
Dilution Ratio Range | 454:1 to 6:1 @ 700 PSI |
Options
5 Gallon Pail | |
---|---|
Pail, 5 Gallon Round W/ Suction Stem | # 709105 |
Square Jug Rack Conversion | |
---|---|
Specify Round or Square Jug Racks at time of order |
Optional Zero Degree Foam Nozzle (For Increased Range) | |
---|---|
Nozzle, NPB, 1/2″ – 00250 | # 180153 |
Alternate Check Valves – EPDM Standard | |
---|---|
Check Valve, Chemical, PP/Viton, 1/4″ | # 491315 |
Check Valve, Air, SS/Viton, 1/4″ | # 491306 |