Overview

The Portable 60 Gallon Liberty LF Foamer is a low volume foam applicator for projecting ready-to-use foaming chemicals on to any surface up close or at distances up to 9 feet. This unit features a stainless steel 4-wheel cart and enclosure and uses a cost-effective 1/4″ Flojet air-operated, double-diaphragm pump to draw pre-diluted chemical from the 60 gallon tank. It injects compressed air into the solution to greatly increase volume and coverage ability and projects rich, clinging foam through the discharge hose, wand and fan nozzle.

Key Features

• Draws pre-diluted chemical from the 60 gallon tank
• Uses a cost-effective 1/4″ Flojet AODD pump with Santoprene diaphragms
• The chemical flow rate is regulated by the foamer body to match the low-range of the air pump’s specified operating range which protects the pump from running, at maximum capacity
• Projects a “low volume” of rich, clinging foam which increases chemical contact time and effectiveness
• Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
• Fan pattern nozzle with 9′ foam throw
• Covers up to 500 sq ft (46.5 sq m) in 4.5 minutes
• 33 minutes of foaming time per 20 gallons of solution
• Adjustable foam consistency (wet/dry)
• Chemical resistant wetted componentsensure durability and years of reliable service
• Available with a 20 gallon tank (#941219-LF)
• Available with a higher flow rate (#941286)
• See other air-operated foamers and sprayers in Catalog 4

Includes

• All stainless steel 4-wheel cart assembly
• Non-marking tires and stainless steel swivel casters
• 60 gallon, wide-mouth, HDPE chemical tank with drain
• Lockable, stainless steel pump enclosure
• Air inlet ball valve and regulator/filter
• Flojet 1/4″ AODD pump
• Machined polypropylene pump-fed foamer body
• 40′ discharge hose, stainless steel ball valve, and polypropylene foam wand & fan nozzle

Requirements

Options